update readme

1 files changed, 6 insertions, 92 deletions

diff --git a/README.md b/README.md
index b86a765..9e619d7 100644
--- a/README.md
+++ b/README.md
@@ -1,96 +1,10 @@
 # joeac.net
 
-Joe Carstairs' public Internet presence
+Joe Carstairs' personal homepage.
 
-To install:
+I host my blog and microlog on both https://joeac.net and gemini://joeac.net. To
+accomplish this without too much duplication, I store my posts in `common/` and
+symlink them into the `gemini/` and `http/` folders.
 
-```sh
-wget -O- https://git.joeac.net/joeac/joeac.net/raw/branch/main/install.sh | sh
-```
-
-## DNS setup
-
-A/AAAA DNS records are added automatically by `make install`, but in order to
-get `mox` working as an email server, you'll have to manually add the following
-DNS records.
-
-Deliver mail for mail.joeac.net to mail.joeac.net:
-
-```
-mail.joeac.net. MX 10 mail.joeac.net.
-```
-
-All emails from the email server will be signed with two DKIM keys. So that
-clients can verify the authenticity of the messages, provide these keys as TXT
-records:
-
-```
-2026a._domainkey.mail.joeac.net. TXT v=DKIM1;h=sha256;p=MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAvYfjrzmYgBtYofzBwI80aiW98+M2g6z+gd1Iwz9g0y30rPFNTctFn9GwBNuYBgZiZxB+sqjEbPMbr3li/R7i0A9t/KbNNJhkNC+4IjKJjk+jw1CXm4vXOUa4YSYWwy7NVYTH/QwZGz6fwjVM7YvDnnE4gG2NwrVx+AXlONt2R1G+qgV6HAIIvVi8T0yCjjqEc5B5bKlqk0XU9vSyUFJhhKnR/KNRe79C+H9GWJzcU7HUCmIHX04Xi0JeB/wm3weF1xjtGTsWyy5BmHHsfWGqSr2Dbg5o6AI5W0h4VkQ4QzdEYGVQ9ZBDyqFQwQFXLn0oHZjCD/vFzPOPdM5pxF/OgwIDAQAB
-2026b._domainkey.mail.joeac.net. TXT v=DKIM1;h=sha256;p=MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAzcrk9FUt6AdrvnAP3KawuOTLw7uL5SJ+ZYmShuz41zwM6bPQteGSSwddFXIxcqVlJrdFahrK4KvHX/sw/hWVfZoPLDdwsGN5eI8cqQjNDE+JDu9BbPlTituva4Hkve0hbAKDqA8jmbcZg6aU7b44Kzq8UpWAlPO273Rq2tsbCBcITt8B3NFoeY9CSsZU1LqGl855GUtaNyhlPaAvfab3Q9/4wyusPhCHlBYaRK+ZzuSMs5KEOG6n4kbZfMVi2+4c/bPU5PdTuyvbSIEqjNH4TpfatE0I9ubGv0WbAzr5EZbv5+xtukZ/dIisPPMjn1AbjpSJYNYr2OYgey6+WvzRmQIDAQAB
-```
-
-Specify the MX host is allowed to send for our domain and for itself (for DSNs).
-~all means softfail for anything else, which is done instead of -all to prevent
-older mail servers from rejecting the message because they never get to looking
-for a dkim/dmarc pass.
-
-```
-mail.joeac.net. TXT v=spf1 ip4:217.155.190.42 ip6:fdc9:6aec:7a18:0:2e0:4cff:fe61:9b17 mx ~all
-```
-
-Emails that fail the DMARC check (without aligned DKIM and without aligned SPF)
-should be rejected, and request reports. If you email through mailing lists that
-strip DKIM-Signature headers and don't rewrite the From header, you may want to
-set the policy to p=none.
-
-```
-_dmarc.mail.joeac.net. TXT v=DMARC1;p=reject;rua=mailto:dmarcreports@mail.joeac.net!10m
-```
-
-Remote servers can use MTA-STS to verify our TLS certificate with the WebPKI
-pool of CA's (certificate authorities) when delivering over SMTP with
-STARTTLSTLS.
-
-```
-mta-sts.mail.joeac.net.  CNAME mail.joeac.net.
-_mta-sts.mail.joeac.net. TXT v=STSv1; id=20260705T153220
-```
-
-Request reporting about TLS failures.
-
-```
-_smtp._tls.mail.joeac.net. TXT v=TLSRPTv1; rua=mailto:tlsreports@mail.joeac.net
-```
-
-Autoconfig is used by Thunderbird. Autodiscover is (in theory) used by
-Microsoft.
-
-```
-autoconfig.mail.joeac.net.         CNAME mail.joeac.net.
-_autodiscover._tcp.mail.joeac.net. SRV 0 1 443 mail.joeac.net.
-```
-
-For secure IMAP and submission autoconfig, point to mail host.
-
-```
-_imaps._tcp.mail.joeac.net.        SRV 0 1 993 mail.joeac.net.
-_submissions._tcp.mail.joeac.net.  SRV 0 1 465 mail.joeac.net.
-```
-
-Next records specify POP3 and non-TLS ports are not to be used. These are
-optional and safe to leave out (e.g. if you have to click a lot in a DNS admin
-web interface).
-
-```
-_imap._tcp.mail.joeac.net.         SRV 0 0 0 .
-_submission._tcp.mail.joeac.net.   SRV 0 0 0 .
-_pop3._tcp.mail.joeac.net.         SRV 0 0 0 .
-_pop3s._tcp.mail.joeac.net.        SRV 0 0 0 .
-```
-
-Optional: You could mark Let's Encrypt as the only Certificate Authority allowed
-to sign TLS certificates for your domain.
-
-```
-mail.joeac.net. CAA 0 issue "letsencrypt.org"
-```
+Both the website and the capsule require a build step. To build, run `make`.
+(There are other dependencies. Caveat emptor.)